Product ID:POLY BD R-45 HT RESIN
MSDS Date:01/01/1987
FSC:8040
NIIN:00F006126
MSDS Number: BBTYP

Emergency Phone: (215) 353-8300

Cage: 3D253

Telephone: 215-353-8300,CHEMTREC 800-424-9300

Cage: 3D253

HYDROXYL TERMINATED POLYBUTADINE

Fraction By Weight: 99.9%

Effects of Overexposure:EYE: MAY CAUSE MINOR IRRITATION. SKIN: MAY
PRODUCE IRRITATION.

First Aid:EYE: RINSE W/CLEAN WATER FOR 20-30 MINS. RETRACT EYELIDS
OFTEN. OBTAIN MED ATT IF NEEDED. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH THROUGHLY W/MILD SOAP & WATER. FLUSH W/LUKEWARM
WATER FOR 15 MINUTES. INHALATION/INGESTION: NO HAZARD W/NORMAL
USE.

Flash Point:400F (OC)
Extinguishing Media:DRY CHEMICAL, CO2, WATERSPRAY, FOAM, WATER FOG.
Fire Fighting Procedures:HEAT FROM FIRE CAN GENERATE FLAMMABLE VAPOR.
Unusual Fire/Explosion Hazard:VAPORS MAY BE >AIR/MAY TRAVEL LONG
DISTANCES ALONG GROUND BEFORE IGNITION/FLASH BACK TO VAPOR SOURCE

Spill Release Procedures:SLIPPERY WALKING/SPREAD GRANULAR COVER.
IMPOUND/RECOVER LARGE LAND SPILL. SOAK UP SML SPILL W/INERT SOLIDS.
PREVENT FLOW TO SEWERS/PUBLIC WATERS. USE SUITAB DISPOSAL
CONTAINERS. DISPERSE RESIDUE TO RE DUCE AQUATIC HARM.

Handling and Storage Precautions:STORE AWAY FROM HEAT, SPARKS, OPEN
FLAMES & STRONG OXIDIZING AGENTS. USE ONLY NON-SPARKING TOO.
PROTECT FROM FREEZING. WASH AFTER HANDLING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID CONTACT WITH
EYES. AVOID PROLONGED OR REPEATED CONTACT W/SKIN. CONTACT LENSES
SHOULDN'TE WORN. USE CAUTION TO AVOID FALLS CAUSING SERIOUS INJURY.

Respiratory Protection:NO SPECIAL RESPIRATORY PROTECTION EQUIPMENT IS
RECOMMENDED.
Ventilation:NO SPECIAL VENTILATION IS RECOMMENDED.
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:SHOWER AFTER WORK USING PLENTY OF SOAP &
WATER.
Supplemental Safety and Health
MSDS DATE: 02/22/85.

Boiling Pt:B.P. Text:300C
Spec Gravity:0.90
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, COLORLESS, VISCOUS LIQ W/HYDROCARBN ODOR
Percent Volatiles by Volume:NEGL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS
Stability Condition to Avoid:OXIDIZING CONDITIONS, EXTREME TEMPERATURES
Hazardous Decomposition Products:SM QTYS OF BUTADIENE, ALONG W/CO &
CO2.

Waste Disposal Methods:LANDFILL SOLIDS AT PERMITTED SITES. BURN
CONCENTRATED LIQUIDS. DILUTING W/CLEAN, LOW VISCOSITY FUEL. AVOID
FLAMEOUTS. ASSURE EFFLUENT COMPLIES W/APPLICABLE REGULATIONS.
CONTAMINATED PRODUCT, SOIL OR W ATER SHOULD NOT BE DESIGNATED RCRA
HAZARD WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.